USAGE INSTRUCTION: All the surfaces must be clean and free of dust. Cyanoacrylate adhesive is applied to one of the surfaces to be bonded and the activator spray is applied to the other surface from 15-20 cm away and without any extreme amounts. Bring pieces together and apply pressure at least 15 seconds. The adhesive set is used to bond in MDF, chipboard, wood, rubber, leather and porous plastic materials. The activator spray is not an adhesive by itself, must be used together with cyanoacrylate adhesive.

SAFETY INSTRUCTION: H222 Extremely  ammable aerosol. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H336 May cause drowsiness or dizziness. H361 Suspected of damaging fertility or the unborn child. H373 May cause damage to organs through prolonged or repeated exposure. H411 Toxic to aquatic life with long lasting effects. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P281 Use personal protective equipment as required. P308 + P313 IF exposed or concerned: Get medical advice / attention. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER / doctor. P302 + P352 IF ON SKIN: Wash with plenty of water. P403 + P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents / container in accordance with local / regional / national / international regulations. EUH066 Repeated exposure may cause skin dryness or cracking. Keep out of the reach of children. Pressured Container: Keep away from sunlight and do not expose temperatures above 40°C. Protect containers from physical damage. Keep away from heat,  ame and spark. Do not pierce or burn, even after use.